16x540mm SDS-Max 4 cut drill bit with a working length of roughly 400 mm. Great for use in SDS-Max drilling and breaking hammers such as the M18 CHM.

Features:

• Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimised drilling performance when hitting reinforced steel equalling longer life time.
• Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip. Reduces jamming upon hitting reinforcing steel.
• Centering point with 130° point angle. Easy spot drilling with pinpoint with pinpoint accuracy and ensures optimum guidance during drilling.
• Big, robust secondary cutter with dynamic, curved cutting edge. Supports the primary cutter for faster drilling.
• Shorter spiral windings for faster transport of drilling dust from the head to the flute. Results in less wear and reduced heat build up at the tip.
• Innovative, unique carbide tip with more carbide on all diameters and extra carbide on ø > 32 mm.
• Wear mark on both sides of primary cutter. Guarantees diameter accuracy i.e. for anchor fittings. Life time indicator in warranty cases.
• Patented reinforced flute geometry. Lower vibrations for smoother drilling. Stronger flute means less breakages. Better transfer of hammer energy to the tip.
• Deep flute shoulders. High volume dust removal for optimum drilling speed less wear and heat build up.
• Low vibration drilling performance. Comfortable drilling ensures less stress for operator and machine.
• Special surface treatment. Shot blasting provides a smooth surface, densifies the surface structure and makes the bit more wear resistant.
• PGM conformity. Guarantees precise holes for anchor fitting over the entire life time of the drill bit.

• Quantity: 1
• Ø: 16 mm
• Total length: 540 mm
• Working length: 400 mm
• Pre-drill with a short drill bit of the same diameter: ✓